Boat Throttle Control
Our top-mounted outboard remote control kit is compatible with Mercury outboard motors. It's made from aluminum ADC2+ASA and an ABS shell handle that resists cracking. The plastic button ensures firm and reliable operation. The Mercury boat throttle control box is more robust and withstands multiple push-pull maneuvers.
Smooth Operation
Press the neutral release button to shift into gear. Push forward about 35 degrees into forward gear, and push back about 35 degrees into reverse gear. With the control lever in Neutral, push the free accelerator button to open the throttle for starting and warm-up.
Trim and Tilt Switch
Enhance your boating experience with the power trim and tilt switch directly on the control lever handle. This design allows for easy adjustment of the stern engine's position, aiding in cargo loading/unloading and preventing prolonged engine immersion.
Low-Temperature Operation
The outboard remote control is equipped with a low-temperature air-fuel ratio adjustment function, which can adjust the fuel and air mixture ratio in cold weather, helping to ensure that the vessel can operate reliably in extreme temperatures.
Long Control Cable
Our remote control box has a 1 ft/320 mm long harness with a 3-pin connector, and a 5.9 ft/1800 mm long harness with 2-pin connector, ensuring ample reach for remote power supply setups. During installation, turn off the ignition, remove the key, disconnect all cables and power, and measure the cable length.